Storage and storage requirements of grinding wheels

If the grinding wheel cannot be installed correctly, it will inevitably affect the normal use, which will not only cause a lot of investment costs, but also bring some potential safety hazards, so the correct installation is very important. The storage of grinding wheels can not be ignored. Here are the storage and storage requirements of grinding wheels:

1. When handling and storing grinding wheels, be careful not to collide. Resin bonded grinding wheels and ceramic bonded grinding wheels are prone to notch and fracture after collision.

2. Do not contact corrosive gases and liquids, especially resin bonded diamond grinding wheels. Contact with corrosive chemicals will change the performance of the resin.

3. Due to the influence of resin aging, the storage life of grinding wheel should not exceed one year, otherwise, its normal use will be affected. If it must be used, relevant safety tests must be carried out again.

4. When the grinding wheel is not in use, the coolant should be washed off immediately to keep the surface of the grinding wheel clean and prevent the oil coolant from going deep into the inside of the grinding wheel, causing imbalance when the grinding wheel is used again.

5. Try to store the grinding wheel at room temperature to avoid contact with high or low temperature.